Polymer Type Surge Arrester 36KV

KEY WORDS:High pressure vacuum switch

Classification:

DETAILS

The basic principle

Metal Oxide Arrester (MOA) is the most advanced over-voltage protection. The core components using Zinc oxide barrier, compare with traditional silicon carbide arrester, it changed the characteristic of arrester, improve the flow capacity of over-voltage, so that make arrester changed fundamentally.
When the arrester working under nominal voltage, only Microamp current flowing through the arrester. When encountered lightning hit, because of the nonlinear of ZnO barrier, thousands of amps current flow through the arrester at that moment, arrester under conduction status, release over-voltage energy, effectively limits the violations of over-voltage on the transmission and distribution equipment.

Condition of Use

Ambient temperature: -40℃ - 40℃
Altitude: 1000-2000m
AC Frequency: 50Hz or 60Hz
Long-term working voltage applied to the arrester does not exceed the continuous operating voltage.
Maximum wind velocity: ≤35m/s
Earthquake class: ≤7°
Polluted areas should state.

Use characteristics
Metal oxide surge arresters use for protection of AC electrical power system, avoid from the atmosphere over-voltage and operating over-voltage damage.

Technical Standards
GB11032-2000、JB/T8952-1999、IEC60099-4、IEEE.C62.11

Technical Parameters
 

Code No. Rated Voltage MCOV Current impulse Residual Voltage Long impulse withstand
current 2000 us
4/10μs   High current impulse
withstand
1/4μs Steep current impulse 8/20μs Lightning current impulse 30/60μs Switching
current impulse
KV(rms) KV(rms) KV(crest) KV(crest) KV(crest)
YH5W-36 36 29.0 117 103 92.4 150 65
YH10W-36 36 29.0 117 103 92.4 250 100
RETURN

Related products

undefined

undefined

Welcome to leave a message for consultation