Porcelain Type Surge Arrester 33KV

KEY WORDS:High pressure vacuum switch

Classification:

DETAILS

The basic principle

Metal Oxide Arrester (MOA) is the most advanced over-voltage protection. The core components using Zinc oxide barrier, compare with traditional silicon carbide arrester, it changed the characteristic of arrester, improve the flow capacity of over-voltage, so that make arrester changed fundamentally.

When the arrester working under nominal voltage, only Microamp current flowing through the arrester. When encountered lightning hit, because of the nonlinear of ZnO barrier, thousands of amps current flow through the arrester at that moment, arrester under conduction status, release over-voltage energy, effectively limits the violations of over-voltage on the transmission and distribution equipment.

Condition of Use

Ambient temperature: -40℃ - 40℃

Altitude: 1000-2000m

AC Frequency: 50Hz or 60Hz

Long-term working voltage applied to the arrester does not exceed the continuous operating voltage.

Maximum wind velocity: ≤35m/s

Earthquake class: ≤7°

Polluted areas should state.

 

Use characteristics

Metal oxide surge arresters use for protection of AC electrical power system, avoid from the atmosphere over-voltage and operating over-voltage damage.

 

Technical Standards

GB11032-2000、JB/T8952-1999、IEC60099-4、IEEE.C62.11

 

Technical Parameters

Code No.

Rated Voltage

MCOV

Power frequency discharge voltage

1.2/50μs Impulse discharge Voltage

8/20μs Lightning impulse residual voltage

Long impulse withstand current2000us

4/10μs High current impulse withstand

KV(rms)

KV(rms)

KV(rms)

KV(rms)

KV(crest)

KV(crest)

KV(crest)

Y5C-33

33

27.5

56

99

99

100

65

Y10C-33

33

27.5

56

99

99

200

65

 

RETURN

Related products

Welcome to leave a message for consultation